The PD180CBT30Q/MU sensor is developed specifically for the domestic and industrial door market. The sensor meets the regulations for industrial doors in Europe and North America. The robust polycarbonate housing allows flexible installation as the lenses are adjustable both in horizontal and vertical direction. The sensor is easy to use and no sensitivity adjustments are necessary. The aspherical lens design is superior to previous design of sensors with built-in parabolic reflectors that had corrosion and dust problems. Increased safety by built-in: - Sensor test function; the emitter has a built-in test input designed to mute the emitter and thus evaluate the sensor function. Test function is to be activated by the door controller or the door function can be activated by a limit switch, magnet sensor or a safety edge profile. The receiver works with a power-supply from 12 to 24 VAC/DC and the emitter is designed to use 2 x 3.6 V Lithium batteries.Quick Features: Industrial doors and gates Range 30m Modulated, infrared light Supply voltage: 12 to 24 VAC/DC (receiver) Supply voltage: 2 x 3.6 VDC Lithium batteries (emitter) SPST relay output SPST relay low battery LED for output indication Protection: reverse polarity, transients Connection, terminal block Emitter mute CE and UL325 approved
Included in shipment is PD180 emitter and receiver (separate box) Installation instruction in emitter box Packaging: Cardboard box 2 x 3 screws for raw plugs ψ2.9 x 25 DIN 7981C 2 x 3 raw plugs for 8 mm hole 2 x 1 Strain releif 2 x 2 Screws for strain releif M3 x 12 mm 2 x 1 Cable gland AA lithium batteries
Carlo Gavazzi part number is PD180CBT30MU / PD180CBT30Q.
PESPHOTO
View Product Datasheet (pdf format)
Click here to return to the full list of Carlo Gavazzi Photo Electric Sensors.
