Brisk Heat EXPLOSTION-PROOF (T3) FM approved Drum Heater and Temperature control for 30 GALLON Drums, 1000 watts, 120 VOLTS AC, Metal vessel
Diameter 18.6 inches, Length 58.5 inches, Width 8 inches
Heating element is laminated between TWO layers of 23 mil and twolayers of 25 mil fiberglass reinforced silicone rubber
Silicone rubber density of 26 oz/yd2 (736 grams/m2) per layer
Patented grounded heating element
Dielectric strength of over 2000 volts
Attached adjustable dual set-point NEMA 7 temperature controllerwith power cord 6 feet (1.8m) long. One set-point is set at a hightemperature limit and connected to a red indicator light
392°F (200°C) maximum exposure temperature on heating surface
Moisture and chemical resistant
Blanket leads 6 feet (1.8m) long for NEMA7 controller
The spring closure can be expanded 3” (76mm),p>FM Approved for Class I Division 2 Groups A*, B, C, and DClass II Division 2, Groups F and G
Brisk Heat part number DHCX131000T3.
View Product Datasheet (pdf format)
Click here to return to the full list of Brisk Heat Drum and Tote Heaters.